Bulgarian
Windsurfing
Windsurfing equipment - masts, booms, accessories, boards and sails. SUP - paddle boards.
Subcategories
-
Windsurfing fins
Carbon epoxy and G10 windsurfing fins
Power Box, US Box, Mini Tuttle, Tuttle Box, Deep Tuttle Box.
-
Windsurfing extensions
Windsurfing SDM and RDM extensions
Aluminum and carbon models.
-
Windsurfing booms
Aluminium, carbon and hybrid
windsurfing booms.
-
Windsurfing masts
Windsurfing masts Loft Sails, Unifiber and XO Sails
Constant curve, flex-top, hard-top masts.
-
Windsurfing sails
Windsurfing sails LoftSails, XO Sails and Goya
-
Windsurfing boards
Windsurfing boards
Exocet, Quatro, Lorch, F2 and Goya. SUP (paddle board).
-
Boardbags
Boardbags for windsurf
kiteboard, wakeboard and SUP equipment.
-
Windsurfing sets
Windsurfing sets.
Booms, masts, boards and sails.
There are 8 products.
Fin MFC Freemove Pro 24cm US Box
Reinforced model with a very successful shape. Wide and suitable for shallow waters.
Fin MFC Weed Wave 25см US Box
Fin MFC Weed Wave 25см US Box
The MFC_WSC is ideal for all around wave sailing. Developed in Punta San Carlos, Baja California. Designed for wave sailing in conditions where there is seaweed. The initial curve on the leading edge allows the seaweed to slide instead of getting caught on the fin.
Hydrofoil HB Flow Foil Pack
Hydrofoil Flow Foil Pack
It is a foil or wing under water used to lift the boat’s hull until it is totally outside the water.
The stabilizer increases the pitch control and the lateral stability, which make this foil ideal also for beginners.
Hydrofoil MFC Helios Pro pack - Carbon
MFC Helios Pro pack
Following the development of the MFC HYDROS, the new MFC HELIOS is a Windsurfing & SUP modular hydrofoil, plug and play design, that allows interchangeable wings between both MFC foils.
Fin MFC H1 46cm Deep Tuttle Box
Fin MFC H1 Racing 46cm Deep Tuttle Box
This a cooperation project between Kai Hopf, Duotone windsurfing Sails designer, and Pio Marasco. Both Pio and Kai have been designing fins for more than twenty years, and together they have developed the fastest racing fin ever. Made from CNC shaped G10 with a very thin new profile and custom flex that provides early planning and lots of speed. This new profile applied was designed to avoid cavitation at very high speeds. A new colouring material for pigmentation of the G10 that is absorbed by the resin has been used creating a very smooth surface that helps increases speed.