- Online only
Slalom rocker and bottom shape. Flattest and fastest yet. Longer flat so the board self-trims and is fast regardless of sail ducking or switching stance. We started with a slalom-inspired rocker, tuned for more speed than ever, then stretched the flat section for explosive early planing and instant lift and acceleration into your first move.
Cleaner more ergonomic volume flow, flatter where you need it, slightly more dome at the back foot for control. Volume flow has been completely reimagined — flat underfoot for stability and lightning response, a touch more dome further back for comfort and control, and vee and concave shifted forward for effortless handling in every transition. Double concave increased forward for control, thinner tail for more control landing moves.
Antoine Albert: “We worked a lot on the speed and pop of the Air Pro. When I tested it for the first time, I was blown away by the limitless acceleration that this board brings, even in super choppy conditions. That speed helps a lot to go higher especially in combination with the slightly changed tail that makes the pop easier. The Air Pro is a bit narrower and slightly smaller than its previous iteration, giving you more control in stronger wind and faster spins in the air, meaning its new shape is more radica. Further, we added a smaller volume to the range for super strong wind, smaller people and kids. The Air Pro in full production spec is following me all over the world and excels in all conditions, from Fuerteventura to Bonaire and New-Caledonia, and it allowed me to be 7th overall in last year’s PWA freestyle champoinship.”
Pro Carbon & S-Glass construction.
Available in 89, 99, 106 liters.
Neon yellow on metallic copper.
US center finbox.
Fused Cell Core. Goya boards come with a Fused Cell Core made from EPS. Fused Cell Expanded Polystyrene is a high quality, low weight, rigid, closed cell foam used in advanced modern production boardmaking.
Hyper Skin HD. The entire board is covered in Hyper Skin HD. Hyper Skin is Goya’s proprietary High Density Foam Sandwich, delivering an immensely rigid structure at an extremely light weight. Covering deck, rails and bottom in it, gives Goya Pro boards their incomparable flex and longevity. A third stronger, stiffer and lighter than conventional boards.
Biaxial Carbon & Unidirectional Carbon. Extensive patches of biaxial carbon connect the peak loads of your feet to the rest of the deck, distributing the forces resulting from jumping and waveriding evenly. Additionally, a long and wide deck carbon patch acts as a superior backbone, making you board stiffer and eliminating distortions.
Full S-Glass Hull. S-Glass covers the board 360°. S-Glass provides higher strength and elasticity compared to standard glass, while maintaining more flex than Carbon. Flex is a super important secret to an outstanding Wave board. A full Carbon Wave board would be too stiff to deliver the agility required by radical modern wavesailing. We use a highest quality full S-Glass hull in combination with a highest quality Carbon stance monocoque and core axis reinforcement to meticulously control the flex in our boards. Controlling this flex is a key to what makes Goya Pro Wave boards special and inimitable.
We can organize international delivery to any destination. Please ask in advance for the price!
For international delivery, please send request to us with the product you want, city, state and postal code, so we can check for transport options.
To easily find the product you're looking for, you can use the sorting or filtering options in the top right corner of the product list for a specific category, or in the left panel of the screen. In a main category that has subcategories, all products are displayed, including those in the subcategories. If you enter one of the subcategories, you will only see its products. You can use a wish list for products you like, so you don't have to search for them again. Adding them to this list does not obligate you to anything; you can delete them at any time or, for example, add them to your cart. To contact us, you can use the phone number 0899998594 or the contact form. From the drop-down menu, you can select which directory to go to. Click the logo or "Home" button to return to the main page of the store.
Some products may release color during the first few washes. These products should be washed separately until the color stabilizes.
It is recommended to use quality detergents for colored laundry, free of bleaching ingredients. Detergents with a bleaching effect or chlorine additives are not suitable for maintaining our products. Do not use fabric softener when washing garments with membranes. It clogs the pores and prevents air circulation through the material.
Before washing, check pockets for forgotten items. If the clothes are not heavily soiled, do not wash them at the maximum time or temperature marked on the label. Do not exceed the temperature indicated on the label! If possible, do not use an iron, as most garments will be irrevocably damaged. If the product requires ironing, iron it from the reverse side, without pressing.
Products should always be washed in lukewarm water (30–40 degrees). The laundry detergent must be completely dissolved before washing. Only gently squeeze the product, do not rub it. After washing, rinse the product well and allow it to drain or lightly squeeze it, without twisting.
If drying clothes outdoors, try not to expose colored products to excessive sunlight. When drying indoors, ensure the room is well-ventilated. Place knitted garments horizontally.
Products made of cotton or its blends should be washed at a maximum temperature of 40°. Do not twist, only squeeze and then dry on a flat surface to prevent deformation.
Products made of wool or its blends should be washed only with detergents specifically designed for wool, at a maximum temperature of 30°. Rinse only with lukewarm water with a difference of a maximum of 4°. Do not twist, only squeeze and then dry on a flat surface. Do not hang or put in a dryer!
Before washing your clothes, fully close the zippers. Wash with lukewarm water (up to 30°), using only a small amount of detergent. It is recommended to use specialized detergent for membranes, such as: Wash In Garment Cleaner and Regatta Wash In Reproofer. Rinse up to two times, limit squeezing and spinning to prevent creasing of the clothes. Do not use products containing fabric softeners, stain removers, or bleaching agents, as these substances reduce the functional properties of the clothing.
High-temperature treatment is harmful to any material.
Clothes, especially those with rich dark colors, should be washed, ironed, and hung on the reverse side.
In case you are unsure about the treatment methods or if you do not know how to remove stains, do not experiment.
Drying clothes in direct sunlight poses a risk of stiffening and discoloration.
For two-piece garments, we recommend washing them together, including detachable parts, to keep the colors uniform, and washing jackets with their attached hoods.
Do not use stain removers, as discoloration may occur.
Do not use detergents containing bleaching ingredients.
Maintain textile accessories in the same way as the clothing.
Footwear should be cleaned with a suitable brush, soft cloth, or damp sponge. Smooth leather should be treated with wax. Avoid getting them wet, as it impairs their appearance and deforms them. If the shoes get wet, clean them carefully, dry them, and treat them with a product intended for the respective material type.
Avoid exposing the products to open flames or sources of intense heat radiation.
Protect them from acids, alkalis, and other chemicals.
If the product comes into contact with chemicals, clean it immediately with lukewarm water and restore the protective layer with a specialized product.
Do not leave the product in direct sunlight, especially behind a car window.
Use a soft brush or sponge with water to remove dry dirt.
Dry them in a well-ventilated room, without exposure to direct sunlight or close proximity to heat sources.
Do not store them wet in a closed room or a bag.
Do not use bleaching detergents or aggressive cleaning agents.
Do not wash them in a washing machine.
Do not tumble dry.
The protective layer should be renewed every 2 to 3 years, depending on the frequency of use of the product. For this purpose, we recommend using only special detergents and waxes intended for the specific type of product.